Mercedes-Benz 2008 S-Class Operator'S Manual Download Page 708

Page: 708 / 761

707

Practical hints

Fuses

Fuse box in the rear passenger
compartment

Cover

Opening

왘

Swing down center armrest.

왘

Open cover behind center armrest.

왘

Pull cover

forward in direction of ar-

row.

Closing

왘

Press cover

backward and engage.

Emergency engine shut-down

If the engine cannot be turned off as de-
scribed in the “Turning off the engine” sec-
tion (

컄

page 397), you may use the

following emergency procedure.

왘

Take the fuse chart and the fuse extrac-
tor (if equipped, depending on vehicle
production date) from the vehicle from
the vehicle tool kit (

컄

page 668).

왘

Find row “Emergency engine
shut-down” in the fuse chart table to
identify the fuses that have to removed
as well as their locations.

왘

Remove the respective fuses.

Make sure that the seal in the cover is not

damaged during opening or closing.

Summary of Contents for 2008 S-Class


























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands

Mercedes-Benz 2008 S-Class, Operator'S Manual

Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands