Mercedes-Benz 2008 S-Class Operator'S Manual Download Page 66

Page: 66 / 761

Safety and Security

Panic alarm

왔

Panic alarm

button

Activating

왘

Press and hold

button for at least

1 second.

An audible alarm and flashing exterior
lamps will operate briefly.

Deactivating

왘

Press

button again.

왘

Insert the SmartKey or the SmartKey
with KEYLESS-GO* in starter switch.

왘

Press the KEYLESS-GO* start/stop
button (

컄

page 346).

The SmartKey with KEYLESS-GO must
be inside the vehicle.

USA only:

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interfer-

ence, and

(2) this device must accept any interference re-

ceived, including interference that may
cause undesired operation.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

Canada only:

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:

(1) This device may not cause interference, and

(2) this device must accept any interference re-

ceived, including interference that may
cause undesired operation of the device.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

Summary of Contents for 2008 S-Class


























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands

Mercedes-Benz 2008 S-Class, Operator'S Manual

Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands