Mercedes-Benz 2008 S-Class Operator'S Manual Download Page 350

Page: 350 / 761

349

Controls in detail

Seats

왘

Seat fore and aft:

Press the switch for-

ward or backward in the direction of
arrow

왘

Seat backrest tilt:

Press the switch

forward or backward in the direction of
arrow

Rear power seat* adjustment
(rear outer seats)

Example rear right door

Seat cushion tilt

Seat backrest tilt

Folding down and placing upright head
restraint (

컄

page 355)

Head restraint tilt (

컄

page 355)

Seat fore and aft

왘

Switch on the ignition (

컄

page 344).

왘

Open the respective door.

왘

Adjust desired seat using seat
switches

and

Adjusting front passenger seat from
driver’s seat/rear*

Depending on the set height of the head re-

straint, the seat fore and aft position is automat-
ically pre-set.

Warning!

When adjusting the front passenger seat,

make sure the seat, if occupied, is as far

from the passenger front air bag as possi-

ble.

Otherwise, the passenger could be seriously

or even fatally injured in the event of an ac-

cident or braking maneuver.

Make sure no one is caught or injured while

the seat is being adjusted.

Even with the SmartKey or SmartKey with

KEYLESS-GO* removed from the starter

switch or the SmartKey with KEYLESS-GO*

removed from the vehicle, the power seats

can be operated when the respective door is

open. Therefore, do not leave children unat-

tended in the vehicle, or with access to an

unlocked vehicle. A child’s unsupervised ac-

cess to a vehicle could result in an accident

and/or serious personal injury.

Summary of Contents for 2008 S-Class


























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands

Mercedes-Benz 2008 S-Class, Operator'S Manual

Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands