Mercedes-Benz 2008 S-Class Operator'S Manual Download Page 156

Page: 156 / 761

155

Control systems

COMAND telephone*

SMS messages (Short Message
Service)

SMS functions

The following functions are available:

앫

Receive

앫

Read

The following conditions must be fulfilled
in order to use the functions:

앫

The mobile phone is inserted in the cra-
dle and switched on.

앫

The PIN has been entered (only GSM
mobile phones).

앫

The mobile phone is logged into a mo-
bile network.

앫

Mobile phone book must be download-
ed and available in COMAND.

Inbox

Calling up the SMS inbox

왘

Select “

Telephone

”

“

Telephone

”.

The main telephone menu appears.

Symbol

for unread messages in the

SMS inbox

왘

Select “

Text Message

”.

The SMS inbox appears.

Date and time the highlighted SMS
message was received

To call up options

Highlighted SMS message

Symbol

for unread SMS message

Back to main telephone menu

The

symbol only appears for those mes-

sages which are received while the mobile phone
is inserted in the cradle.

“Text Message” does not function if the

SMS inbox contains no SMS messages. The SMS
inbox only shows the messages which are re-
ceived while the mobile phone is inserted in the
cradle.

Summary of Contents for 2008 S-Class


























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands

Mercedes-Benz 2008 S-Class, Operator'S Manual

Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands