Mercedes-Benz 2008 S-Class, Operator'S Manual

Page: 172 / 761

171
Control systems
COMAND navigation (introduction)
앫
“ Short Route ”: COMAND calculates a
route with the shortest possible (mini-
mized) distance taking distance and
driving time into account.
왘
Select “ Navi ” “ Navi ” “ Mode ”.
The mode list appears. A square
쐍
indi-
cates the current setting.
왘
Select route type: “ Fast Route ” or
“ Short Route ”.
왘
Exit menu: Slide
o m p
or press back
button
L
in the center console
(
컄
page 86).
Setting route mode
왘
Select “ Navi ” “ Navi ” “ Mode ”.
The mode list appears.
왘
Switching mode on or off:
Select desired modes.
Depending on the previous status, the
mode is switched on or off. A check-
mark indicates that the mode is
switched on. It is possible to switch on
more than one mode.
왘
Exiting menu: Slide
o m p
or press
back button
L
in the center console
(
컄
page 86).
COMAND will verify whether it can in-
corporate the modes if you select them
with route guidance active.
If it can, COMAND calculates a new
route while incorporating the modes
selected.
If it cannot, you will see and hear a cor-
responding message.
왘
Select “ OK ”.
COMAND calculates a new route.
Only those modes which can be in-
corporated are used. i
If you change the route type setting during
active route guidance, COMAND calculates a
new route. If you change the setting when route
guidance is inactive, COMAND uses the new set-
ting for the next route guidance.
i
This function allows you to set the following
options for route guidance:
앫
“Minimize Highways”
앫
“Minimize Toll Roads”
앫
“Minimize Tunnels”
앫
“Minimize Ferries/Motorail”