Mercedes-Benz 2008 S-Class, Operator'S Manual

Page: 352 / 761

351
Controls in detail
Seats
왘
Switch on the ignition (
컄
page 344).
or
왘
Open the right rear passenger door.
왘
Press button
1
to adjust the front
passenger seat.
The indicator lamp in button
1
comes
on.
왘
Adjust front passenger seat using seat
switches
2
,
3
,
4
and
5
.
왘
To adjust right rear passenger seat
(
컄
page 349), press button
1
again.
The indicator lamp in button
1
goes
out.
Seat heating*
The buttons for seat heating are located on
the respective door. The red indicator
lamps on the button come on to show the
heating level selected.
Example illustration driver’s door
1
Seat heating button
왘
Switch on the ignition (
컄
page 344).
왘
Switching on: Press button
1
repeat-
edly until the desired heating level is
set.
One or more red indicator lamps on the
button show the selected heating level.
왘
Switching off: Press button
1
repeat-
edly until all indicator lamps go out.
i
Adjusting the passenger seat position from
the rear is not possible if you deactivate the over-
ride switch (
컄
page 63).
Level
3 Three indicator lamps on
(highest level)
The seat heating automatically
switches to level
2 after approxi-
mately 5 minutes.
2 Two indicator lamps on
The seat heating automatically
switches to level
1 after approxi-
mately 10 minutes.
1 One indicator lamp on
(lowest level)
The seat heating automatically
switches off after approximately
20 minutes.
off No indicator lamp on
컄컄