Mercedes-Benz 2008 S-Class Operator'S Manual Download Page 65

Page: 65 / 761

Safety and Security

Occupant safety

앫

sunblinds for panorama roof*
(

컄

page 489)

앫

rear window sunshade (

컄

page 503)

and rear side window sunshades
(

컄

page 385)

The override switch is located on the driv-
er’s door.

Override switch

Indicator lamp

왘

Activating:

Press switch

Indicator lamp

comes on. The func-

tions in the rear are disabled.

왘

Deactivating:

Press switch

again.

Indicator lamp

goes out. The func-

tions in the rear are enabled again.

Warning!

Activate the override switch when children

are riding in the back seats of the vehicle.

The children may otherwise injure them-

selves, e.g. by becoming trapped in the win-

dow opening.

When leaving the vehicle, always remove the

SmartKey or SmartKey with KEYLESS-GO*

from the starter switch, take it with you, and

lock your vehicle. Do not leave children un-

attended in the vehicle, or with access to an

unlocked vehicle. A child’s unsupervised ac-

cess to a vehicle could result in an accident

and/or serious personal injury.

Operation of the rear door windows with the

switches located in the driver’s door is still pos-
sible.

Summary of Contents for 2008 S-Class


























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands

Mercedes-Benz 2008 S-Class, Operator'S Manual

Search results

Summary of Contents for 2008 S-Class

Reviews:

Related manuals for 2008 S-Class

Brands by name

Popular brands