Mercedes-Benz 2008 S-Class, Operator'S Manual

Page: 190 / 761

189
Control systems
COMAND navigation system (entering a destination)
List of intersections with input
characters
When this list appears, the input charac-
ters
4
are automatically activated.
1
Top list entry based on the input data
up to that point
2
Characters entered by the user
3
Characters automatically added by the
system
4
Input characters
5
Currently non-selectable characters
6
Currently selectable character
7
List of intersections
8
Currently selected character
While the characters are being selected as
described below, the top list entry
1
al-
ways shows the intersection which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters
2
entered by the
user with appropriate characters
3
.
왘
Selecting characters: Slide
o m p
or
rotate
y m z
.
왘
Confirming character selection:
Press
n
.
왘
Deleting individual characters:
Select
)
in the bottom line and
press
n
.
왘
Deleting an entire entry: Select
)
in
the bottom line and press
n
until the
entire entry is deleted.
왘
Canceling character entry:
Select “ Back ” in the bottom line and
press
n
.
or
왘
Press back button
L
in the center
console (
컄
page 86).
As soon as COMAND can clearly attribute
the characters entered to an intersection,
the input characters
4
disappear. You see
the list of intersections without the input
characters. Here you can confirm the cur-
rent entry or make another selection.
During character entry, you can also man-
ually switch to the list of intersections
without input characters at any time.
왘
Switching manually to the list of in-
tersections without input charac-
ters:
Slide
q m
.
or
왘
Select
?
in the second line from the
bottom and press
n
.
i
In the list of input characters
4
, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.