Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 202 / 569

201
Controls in detail
Automatic transmission
Steering wheel gearshift control
With drive position
D
selected, you can
limit or extend the gear range.
1
Left shift button: limiting gear range
2
Right shift button: extending gear
range
Limiting gear range
왘
Briefly press left shift button
1
.
The transmission will shift to the next
lower gear as permitted by the shift
program. This action simultaneously
limits the gear range of the transmis-
sion (
컄
page 199).
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
i
You cannot shift with the steering wheel
gearshift control buttons when the transmission
in position
P , N or R .
Warning!
G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
i
To avoid overrevving the engine when down-
shifting, the transmission will not shift to a lower
gear if the engine’s max. speed would be
exceeded.