Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 256 / 569

255
Controls in detail
Panorama roof with power tilt/sliding panel*
Fully opening (Express-open) the
panorama roof with tilt/sliding panel
왘
Pull the roof panel switch past the
resistance point in direction of
arrow
1
(
컄
page 254) and release.
The tilt/sliding panel opens com-
pletely.
Stopping the panorama roof with
tilt/sliding panel during Express-open
왘
Move the roof panel switch in any
direction.
The tilt/sliding panel will stop in its
current position.
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel and its roller
sunblinds must be synchronized
앫
after the battery has been
disconnected or discharged
앫
after a malfunction
앫
if the tilt/sliding panel does not open
smoothly
왘
Switch off the ignition (
컄
page 40) and
remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
왘
Switch off the ignition (
컄
page 41).
왘
Open the driver’s door (this puts
the starter switch in position
0 ,
same as with the SmartKey
removed from the starter switch).
The driver’s door then can be
closed again.
왘
Remove the fuse for the tilt/sliding
panel from the fuse box (
컄
page 518).
!
Do not attempt to open or close the
tilt/sliding panel before the tilt/sliding panel is
properly synchronized. The tilt/sliding panel
could otherwise lock-up in the open position.
If the tilt/sliding panel cannot be closed or
synchronized, contact an authorized
Mercedes-Benz Light Truck Center or call
Roadside Assistance (
컄
page 325).
i
For information on which fuse box contains
the fuse for the power tilt/sliding panel, see the
fuse chart provided with the vehicle tool kit
(
컄
page 469).
컄컄