Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 183 / 569

182
Controls in detail
Control system
왘
Press button
j
or
k
repeatedly
until the message Compass Calibra-
tion appears in the multifunction
display.
The selection marker is on setting Off .
왘
Press button
æ
to set the selection
marker to Start .
The following message appears in the
multifunction display:
Compass Calibration Active
Please drive in a full circle
.
왘
Drive a full circle at a vehicle speed
of between 3 mph and 6 mph
(5 km/h and 10 km/h).
When calibration was successful, the
following message appears in the
multifunction display:
Compass Calibration
Completed Successfully
Audio search function
Use of the Audio search function to
select a radio station (
컄
page 166) will
enable you to start a frequency scan
(
Frequency ) or select a radio station stored
in memory ( Memory ).
왘
Move the selection marker with
button
æ
or
ç
to the Vehicle
submenu.
왘
Press button
j
or
k
repeatedly
until the message Audio Search
Function appears in the multifunction
display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
Frequency or Memory .
i
If the message
Compass Calibration
Completed Successfully
does not appear in
the multifunction display, drive another full
circle.
If calibration does not succeed within 3 minutes,
the message
Compass Calibration
appears
in the multifunction display again. Calibrating the
compass has failed due to outside influences.
Repeat compass calibration in a different
location.
컄컄