Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 296 / 569

295
Controls in detail
Loading
왘
Move the seat to be folded to its rear-
most position (
컄
page 134).
왘
Remove the rear center console*, if so
equipped (
컄
page 315).
왘
Remove the head restraint from the
respective second-row seat
(
컄
page 136).
1
Seat backrest
2
Seat cushion
3
Release lever
왘
Place the head restraint on the seat
cushion.
왘
Relieve the load on seat backrest
1
and pull release lever
3
past the
resistance point in direction of arrow
as far as it will go.
Seat and seat backrest are unlocked.
왘
Fold seat backrest
1
forward until it
fully rests on seat cushion
2
in a
horizontal position.
1
Seat backrest
2
Seat cushion
왘
Push down on folded seat backrest
1
until seat cushion
2
engages in seat
base.
i
The rear center console* can remain
installed, if installed in the most forward position
(
컄
page 317). However, the cargo compartment
floor will then not be an even plane.
The storage compartment and the cupholders in
the rear center console* are only illuminated,
when the rear center console* is installed in the
most rearward position (position 0)
(
컄
page 317).