497
Practical hints
Flat tire
Screw-type jack (example illustration)
Scissors-type jack (example illustration)
왘
Vehicles with screw-type jack:
Turn
crank
4
clockwise until jack
3
is fully
seated in take-up bracket
2
and the
jack base evenly meets the ground.
왘
Vehicles with scissors-type jack:
Turn ratchet
4
up and down until
jack
3
is fully seated in take-up
bracket
2
and the jack base evenly
meets the ground.
왘
Continue to turn crank/ratchet
4
until the wheel is a maximum of
1.2 in (3 cm) from the ground.
Removing the wheel
1
Alignment bolt
왘
Unscrew upper-most wheel bolt and
remove.
왘
Replace this wheel bolt with alignment
bolt
1
supplied in the vehicle tool kit
(
컄
page 467).
왘
Remove the remaining wheel bolts.
왘
Remove the wheel.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolts and wheel
hub threads.
Summary of Contents for 2008 R 320 CDI 4MATIC
