Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 56 / 569

55
Getting started
Driving
Gasoline engine
왘
Make sure the automatic transmission
is set to
P .
The transmission position indicator in
the multifunction display should be
on
P .
왘
Depress the brake pedal during the
starting procedure.
왘
Do not depress the accelerator.
왘
Press the KEYLESS-GO start/stop
button once.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
Diesel engine
왘
Make sure the automatic transmission
is set to
P .
The transmission position indicator in
the multifunction display should be
on
P .
왘
Depress the brake pedal during the
starting procedure.
왘
Do not depress the accelerator.
왘
Press the KEYLESS-GO start/stop
button once.
The engine preglows and starts if the
SmartKey with KEYLESS-GO is in the
vehicle.
Starting difficulties
If the engine does not start as described,
carry out the following steps:
왘
If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position
0 and repeat starting
procedure.
왘
If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better
detection of the SmartKey with
KEYLESS-GO.
or
왘
Remove KEYLESS-GO start/stop
button from starter switch.
왘
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
i
If the engine is at operating temperature,
the time the engine needs to preglow is reduced.
컄컄