Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 383 / 569

382
Operation
Tires and wheels
If you want to set new reference values
manually:
왘
Using the Tire and Loading Information
placard on the driver’s door B-pillar
(
컄
page 366) or, if available, the sup-
plemental tire inflation pressure
information on the inside of the fuel
filler flap (
컄
page 352), make sure the
tire inflation pressure of all four tires is
correct.
왘
Press button
è
or
ÿ
on the mul-
tifunction steering wheel repeatedly
until the standard display menu
appears in the multifunction display
(
컄
page 164).
왘
Press button
j
or
k
repeatedly
the current inflation pressures for each
tire appear in the display or the follow-
ing message appears in the display:
Tire pressure
displayed after
driving for
a few minutes
.
왘
Press the reset button (
컄
page 154).
The following message will appear in
the multifunction display:
Restart tire
pressure monitor?
Warning!
G
It is the driver’s responsibility to calibrate
the TPMS on the recommended cold infla-
tion pressure. Underinflated tires affect the
ability to steer or brake the vehicle. You
might lose control over the vehicle.
i
Restart the TPMS after adjusting the tire in-
flation pressure to the inflation pressure recom-
mended for the vehicle operating condition. Tire
pressure should only be adjusted on cold tires.
Observe the recommended tire inflation pres-
sure on the Tire and Loading Information placard
on the driver’s door B-pillar (
컄
page 366).
Some vehicles may have supplemental tire infla-
tion pressure information for driving at high
speeds (
컄
page 372) or for vehicle loads less
than the maximum loaded vehicle condition
(
컄
page 372). If such information is provided, it
can be found on the inside of the fuel filler flap.