Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 303 / 569

302
Controls in detail
Loading
앫
With the cargo compartment expanded
in part (
컄
page 292), use holders
behind C-pillars
2
and the cargo
tie-down rings in the third-row footwell
(
컄
page 291).
앫
With the cargo compartment fully
expanded (
컄
page 293), use holders
behind B-pillars
1
and the cargo
tie-down rings in the second-row
footwell (
컄
page 291).
왘
Open the hook and loop fasteners on
the cargo net package.
왘
Roll out the cargo net.
왘
Unfold the cargo net.
The cargo net bars must audibly
engage.
Installing the cargo net
Cargo net installed behind the B-pillar
1
Holder
2
Cargo net bar
왘
Hang cargo net bar
2
on holder
1
as
indicated by the arrow.
왘
Push cargo net bar
2
forward into
holder
1
in direction of arrow.
Pulling the cargo net tight
Belt hook attached in the second-row
footwell
1
Belt hook
2
Cargo tie-down ring
3
Tightening belt
왘
Hook belt hook
1
into cargo tie-down
ring
2
in direction of arrow.
왘
Pull tightening belt
3
by the loose end
in direction of arrow until the cargo net
is pulled tight.
왘
After driving a short distance, make
sure the cargo net is still tight and, if
necessary, pull it tight again.