Mercedes-Benz 2008 R 320 CDI 4MATIC, Operator'S Manual

Page: 135 / 569

134
Controls in detail
Seats
Fore and aft adjustment
(outboard second-row seats)
The handles for adjusting the seats are
located on the front of each seat base.
1
Adjustment handle
왘
Pull up handle
1
in direction of arrow
and hold it there.
왘
Move seat to the desired position.
왘
Release handle
1
.
The seat must audibly engage.
Seat backrest tilt
(outboard second-row seats)
The handles for adjusting the seats are
located on the rear of each seat base.
1
Adjustment handle
왘
While seated, pull handle
1
in direc-
tion of arrow to resistance point and
hold it there.
After adjusting rear seats, make sure
앫
the seats are properly locked
앫
the seat backrests are in an upright po-
sition and are properly locked
An outboard second-row seat is properly
locked only when lock status indicator
1
is
in hinged position and red marking
2
is
barely visible (
컄
page 131).
If a seat and seat backrest are not properly
locked, the seat could move forward and the
seat backrest could fold. You could slide un-
der the seat belt during braking, vehicle ma-
neuvers, or in an accident. If you slide under
it, the belt would apply force at the abdomen
or neck. That could cause serious or even
fatal injuries.
컄컄