9
Safety regulations
1.6
Changes and alterations
No unauthorised changes or alterations may be made to the appliance. No parts may be
added or inserted which have not been approved by the manufacturer.
Unauthorised modifications or changes result in the CE declaration of conformity losing its
validity and the appliance must no longer be operated.
The manufacturer is not liable for any damage, danger or injuries that result from
unauthorised changes or alterations, or from non-observance of the regulations in this
manual.
1.7 Behaviour in case of malfunctions and irregularities
The appliance may only be used in a flawless condition. If you as the operator notice
irregularities, malfunctions or damage, immediately take the appliance out of service and
inform your superior.
You can find information on correcting malfunctions from page 34.
1.8 Switching off the appliance in an emergency
Push the On/Off switch on the control panel
( Fig. 1 ). This disconnects the appliance from
the power supply at all poles.
Warning!
Depending on operation,
the surfaces in the working
chamber and the chamber
load may still be very
hot after the appliance
is switched off. Touching
these surfaces can cause
burns. Wear heat-resistant
protective gloves or wait
until the appliance cools
down. To do so, pull the
handle bar until the door
springs open into its
ventilating position (see
page 21).
ON
O
O
ON
N
N
N
O
O
N
O
Fig. 1
Switch off the appliance by pressing the On/
Off switch
