27
Operation and control
5.4.6
Programme mode
In this operating mode, programmes saved in the appliance can be started with different
combinations of individual parameters (temperature, air flap position, fan speed, working
chamber lighting) at staggered intervals, which the appliance then automatically processes in
sequence. These programmes are not created directly at the appliance but externally at a com-
puter / laptop and using AtmoCONTROL software. Transfer to the appliance is possible using
the provided USB storage medium or via Ethernet.
A description of how to create and save programmes can be found in the separate
AtmoCONTROL software manual.
Starting a programme
1. Press the activation key to the right of
the status display. The current operating
mode is highlighted automatically, in this
example
Manual Mode
(
).
0
%
manueller Betrieb
%
Fr 20.10.2010 20:31
0°C
off
40
80
GRAPH
40
80
GRAPH
APH
Manual mode
17:44
13.Sept.2012
2. Turn the turn control until the
start
symbol is highlighted. The current
programme is displayed, in this example
Test 012
.
Test 012
ready
10:44
12.Sept.2012
Only the programme currently selected in the menu and shown in the display can be
used. If you want to process another programme, you need to activate it in the menu
first (description from page 48 ).
3. To start the programme, press the confir-
mation key. The programme starts. The
display shows:
►
the programme description (in this exam-
ple
Test 012
)
►
the programme segment description, in
this example
Ramp 1
►
the current run (in case of loops)
Test 012
Ramp 1
10:44
12.Sept.2012
You cannot change any parameters (e.g. the temperature) at the appliance while a
programme is running. However, the displays
ALARM
and
GRAPH
can still be used.
Cancelling a programme
You can cancel an active programme at any
time.
1. Press the activation key to the right of
the status display. The status display is
automatically highlighted.
0
%
manueller Betrieb
%
Fr 20.10.2010 20:31
0°C
80
GRAPH
80
GRAPH
APH
Test 012
Ramp 3
10:44
12.Sept.2012
