background image

21

 Operation and control 

5.  

 Operation and   control

Caution:

When loading and operating  sterilisers of the SN

PLUS

/SF

PLUS

 type, make sure to observe the 

special notes provided in chapter “Sterilisers SFPLUS/SNPLUS” from page 52.

5.1  

 Operating personnel

The appliance may only be operated by persons who are of legal age and have been instruct-

ed accordingly. Personnel who are to be trained, instructed or who are undergoing general 

training may only work with the appliance under the continuous supervision of an experi-

enced person.

5.2  

  Opening the door

 

To open the door, pull the handle bar to the side (to the left or to the right, depending on 

the door variation, see Fig. 12, A). The door opens slightly, so that the heat can be vented 

with the door ajar in case of high temperature inside the chamber. The door can then be 

opened completely (B).

 

To close the door, push the handle bar back (C).

A

C

B

Fig. 12 

 Opening and closing the door 

Warning!

In case of appliances of a certain size, you can get accidentally 

locked in, which is life-threatening. Do not climb into the appliance!

Summary of Contents for IF 110 PLUS





























































Reviews: