Installation manual
M-WRG-S/Z-S, M-WRG-S/Z-24,
M-WRG-S/Z-EIB, M-WRG-S/Z-KNX (-F, -FC)
- 13 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
7 Connecting the M-WRG-S/Z-24 to the control cable
NOTE
The installation must be carried out in accordance with the generally acknowledged rules of tech-
nology.
7.1
Overview of the modules
7.1.1 Board in M-WRG-S/Z-24 ventilation unit
Fig. 6: Board in M-WRG-S/Z-24 ventilation unit
NOTE
—
The DIP switches and jumpers on the board are preset at the factory.
►
Do not change the position of any DIP switches or jumpers.
7.2
Control cable types
Part no.
Type of ventilation unit Control cable types
5016-2-1
M-WRG-S/Z-24
J-Y (St) Y 4 x 2 x 0.6 mm
2
or J-Y (St) Y 4 x 2 x 0.8 mm
2
Table 4: Allocation of ventilation unit type and control cable type
7.3
Connecting the control cable to the ventilation unit
7.3.1 Removing the cover from the ventilation unit and removing the network
connection cover
►
Remove the cover from the ventilation unit (see section 6.3.1 on page 9).
►
Remove the network connection cover (see section 6.3.2 on page 9).
