Meltem M-WRG-S/Z-24 Installation Manual Download Page 20

Page: 20 / 32

Installation manual

M-WRG-S/Z-S, M-WRG-S/Z-24,

M-WRG-S/Z-EIB, M-WRG-S/Z-KNX (-F, -FC)

- 20 -

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION THE RIGHT WAY

V E N T I L AT I O N & H E AT R E C O V E R Y

8.4

Fixing the EIB universal interface 6119/40 in the ventilation unit and

connecting the EIB bus cable

8.4.1 Fixing the EIB universal interface 6119/40 to the network connection cover

►

Thread the EIB bus cable through the

opening (item 1 in Fig. 12) in the network

connection cover.

►

Re-insert the network connection cover

(item 2 in Fig. 12).

►

Pull the glue dot off the Velcro dot (item 3

in Fig. 12).

►

Fix the EIB universal interface to the Vel-

cro dot.

8.4.2 Connecting the EIB bus cable to the EIB universal interface 6119/40

►

Connect the EIB bus cable to the EIB uni-

versal interface 6119/40, ensuring that the

polarity is correct:

►

Connect the “+” bus wire to the red

terminal (item 1 in Fig. 13).

►

Connect the “-” bus wire to the grey

terminal (item 2 in Fig. 13).

NOTE

The EIB universal interface will not work if the bus

cables are connected with the wrong polarity.

8.5

Programming the EIB universal

interface 6119/40

►

The EIB universal interface 6119/40 must

be programmed by the electrician on site.

8.6

Final tasks

►

Attach the cover to the ventilation unit (see section 6.3.4 on page 12).

Fig. 12: Fixing the EIB universal interface 6119/40 to

the Velcro dot

Fig. 13: Connecting the EIB bus cable to the EIB

universal interface 6119/40

Summary of Contents for M-WRG-S/Z-24

































Search results

Summary of Contents for M-WRG-S/Z-24

Reviews:

Related manuals for M-WRG-S/Z-24

Brands by name

Popular brands

Meltem M-WRG-S/Z-24, Installation Manual

Search results

Summary of Contents for M-WRG-S/Z-24

Reviews:

Related manuals for M-WRG-S/Z-24

Brands by name

Popular brands