Installation manual
M-WRG-S/Z-S, M-WRG-S/Z-24,
M-WRG-S/Z-EIB, M-WRG-S/Z-KNX (-F, -FC)
- 9 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
6.2
Control cable types
Part no.
Type of ventilation unit Control cable types
5016-1-0
M-WRG-S/Z-S
J-Y (St) Y 4 x 2 x 0.6 mm
2
or J-Y (St) Y 4 x 2 x 0.8 mm
2
Table 2: Allocation of ventilation unit type and control cable type
6.3
Connecting the control cable to the ventilation unit
6.3.1 Removing the cover from the ventilation unit
►
Using both thumbs, press the two latches
(item 1 in Fig. 2) on the bottom of the ven-
tilation unit. The cover will come away.
►
At the same time, push your index fin
-
gers into the gap between the cover and
housing, and lift the cover away from the
housing.
6.3.2 Removing the network connection cover
►
Press the latch (item 1 in Fig. 3) of the
network connection cover (item 2 in
Fig. 3) gently towards the middle of the
unit, and lift up the network connection
cover.
Fig. 2: Removing the cover from the ventilation unit
1
1
Fig. 3: Removing the network connection cover
1
2
