Installation manual
M-WRG-S/Z-S, M-WRG-S/Z-24,
M-WRG-S/Z-EIB, M-WRG-S/Z-KNX (-F, -FC)
- 16 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
8 Connecting the M-WRG-S/Z-EIB to the EIB
universal interface 6119/40 and EIB bus cable
NOTE
The installation must be carried out in accordance with the generally acknowledged rules of tech-
nology.
8.1
Overview of the modules
8.1.1 Board in M-WRG-S/Z-EIB ventilation unit
Fig. 8: Board in M-WRG-S/Z-EIB ventilation unit
NOTE
—
The DIP switches and jumpers on the board are preset at the factory.
►
Do not change the position of any DIP switches or jumpers.
8.1.2 EIB universal interface 6119/40
To control the M-WRG-S/Z-EIB ventilation unit you will need an EIB universal interface with four
connections that can be configured as inputs or outputs, e.g. from BUSCH-JAEGER, part no.
6119/40, order no. 6133-0-0151.
You will need an EIB universal interface with four outputs and two inputs in order to activate all the
ventilation unit functions and signal both feedbacks.
NOTE
The EIB universal interface 6119/40 is not one of the items supplied.
