Mellanox Technologies SX6710, Hardware User Manual

Page: 65 / 112

Mellanox Technologies
59
13. Equipment Installation
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.
14. Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
15. Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical
codes.
16. Installation Codes
This device must be installed according to the latest version of the country
national electrical codes. For North America, equipment must be installed in
accordance to the applicable requirements in the US National Electrical Code
and the Canadian Electrical Code.
17. Battery Replacement
Warning: Replace only with UL Recognized battery, certified for maximum
abnormal charging current not less than 4mA
There is a risk of explosion should the battery be replaced with a battery of an
incorrect type.
Dispose of used batteries according to the instructions.
18. UL Listed and CSA Certified Power Supply Cord
For North American power connection, select a power supply cord that is UL Listed
and CSA Certified, 3 - conductor, [16 AWG], terminated with a molded plug rated at
125 V, [13 A], with a minimum length of 1.5m [six feet] but no longer than 4.5m.
For European connection, select a power supply cord that is internationally

harmonized and marked “<HAR>”, 3 - conductor, minimum 1.0 mm
2
wire,
rated at 300 V, with a PVC insulated jacket. The cord must have a molded plug
rated at 250 V, 10 A.