Mellanox Technologies SX6710, Hardware User Manual

Page: 47 / 112

Mellanox Technologies
41
Push the Resetr button and keep it pressed for up to 15 seconds.

 To reset the system, the CPU of its management board and the “admin” password, perform
the following:
Push the Reset button and keep it pressed for at least 15 seconds. You will then be able to enter
without a password and set a new password for the user
“admin” .

In the externally managed systems the reset button resets the device.
4.2 LEDs
4.2.1 LED Notifications
The system’s LEDs are an important tool for hardware event notification and troubleshooting.
Table 13 - LEDs Symbols
Symbol Name Description Normal Conditions
System Status LED Shows the health of the system Green/Flashing
green when booting
Fan Status LED
Shows the health of the fans Green
Power supply units
LEDs Shows the health of the power supply units Green
Bad Port LED lights up when a symbol error is detected on one
of the ports. Off
*
*Unit Identifier LED Lights up on command through the CLI Off or blue when
identifying a port
*This function is currently disabled.