Chapter 8
– Function test
46
Bowie & Dick test
The →Bowie & Dick test serves the verification of the steam
penetration of porous materials such as textiles.
For this purpose, use the test program
Bowie&Dick テスト
.
Diverse test systems are offered by specialist dealers for the
→Bowie & Dick test. Conduct the test according to the
manufacturer's instructions of the test system.
Start the program Bowie & Dick test as follows:
Switch the device on at the mains switch. The display
switches into its initial state.
Select the Bowie & Dick test with the K
EY
(P).
Press the K
EY
(S) to start the Bowie & Dick test.
After successful completion of the program the display
shows in alternation with the current batch number of the
day and
‘+’ キｰテ゛ カクニンヲ オワル.
After
pressing the
KEY
(+) you can open the door.
Display water quality
You can at all times have the display of water quality shown
on the switched on the steam sterilizer, also during a running
program.
To do this keep the K
EY
(-) pressed until the display shows the
→Conductivity. The conductivity is stated in µS/ cm.
As soon as you release the K
EY
(-) the display returns to its
previous status (e.g. initial state).
Pre-heating temperature of the chamber
If you press the K
EY
(-) twice shortly and the second time keep
it pressed, the pre-heating temperature of the chamber is
shown instead of the →Conductivity.
Bowie&Dick テスト
AIN6: ト゛ウテ゛ンリツ
15µS/cm
AIN4: ヨヒ゛カネツ オント゛
120
°
C
