Chapter 3
– Initial start-up
17
Prerequisites for initial start-up
The following prerequisites must be satisfied for initial start-up:
The feed water supply must be secured.
The power supply of the steam sterilizer must be assured.
Record of installation and setting up
(optional)
NOTICE
As documentation of proper setting up, installation and setting up as well
as for your warranty claim, the record of installation must be filled out by
the person responsible and a copy sent to MELAG.
Switch on steam sterilizer
Warning!
Unsupervised operation of electrical devices, including this sterilizer at
the operator’s risk. MELAG accepts no liability what so ever for any
damage resulting from unsupervised operation.
Switch on mains
Turn the mains switch on to power the steam sterilizer
(page 10,
Fig. 1/(4)
).
After switching on
After switching on the steam sterilizer with the mains switch, the
→display shows in alternation to the initial state the message
ト゛アノ カイシ゛ョ ‘+’ キｰ ヲ オシテクタ゛サイ
, if the door
is closed.
Directly after having switched on the steam sterilizer and before initial
start-up, remove the trays and accessories from the chamber.
Press the
KEY
(+) to unlock the door. After pressing the key you can
open the door
