Chapter 5
– Logging
36
Select the SETUP Menu
キノウ
by short simultaneous
pressing of the keys (+) and (-). The display shows
キノウ:
サイコ゛ノ ハ゛ッチナンハ゛ｰ.
Navigate with the
KEY
(+) or (-) until on the display
キノウ:
ハ゛ッチノ シュツリョク
is shown and press the
KEY
(P).
Navigate with the
KEY
(+) or (-) until on the display
セ゛ンサ
イクルヲサクシ゛ョスル
is shown.
Press the K
EY
(P) in order to delete all logs now.
In order to cancel the submenu without deleting, press the
K
EY
(S).
In order to leave the menu after deletion, press the K
EY
(P).
The display shows
キノウ: ハ゛ッチノ シュツリョク
.
By again pressing the K
EY
(S), you completely leave the
menu and return to the starting position of the display.
Display protocol memory
With a connected and initialised printer or another output
medium you can verify how many logs are already saved in the
log memory of the steam sterilizer.
Proceed as follows:
Select the SETUP Menu
キノウ
by short simultaneous
pressing of the
KEYS
(+) and (-). The display shows
キノウ:
サイコ゛ノ ハ゛ッチナンハ゛ｰ.
Navigate with the
KEY
(+) or (-) until on the display
キノウ:
ハ゛ッチノ シュツリョク
is shown and press the
KEY
(P).
Navigate with the K
EY
(+) or (-), up to the display for the
Storage Occupancy (see left Display Figure) are shown.
In order to leave the menu again, press the K
EY
(S) twice.
Read log files correctly
Header
The head of the program listing includes the general
fundamental information for the completed program such as for
example current date, the selected program, the daily batch
number and the steam sterilizer type.
Values of the program steps
During the program the program sequence phases are recorded
with the accompanying values for steam pressure, temperature
and time (relative to the program start).
Summary
The summary states whether the program was successfully
concluded. Furthermore the values of the required sterilization
time, the sterilization temperature and the pressure including its
maximum deviations are displayed.
セ゛ンサイクルヲ
サクシ゛ョスル
ホソ゛ン キロクスウ: 0
アキ キロクスウ: 40
