Meiko M-iClean H series, Operating Instructions Manual

Page: 40 / 62

9750359 40 / 62
8.3.10 Closing the hood without triggering automatic wash start
Option 1: automatic wash start has not been activated
, see chapter “
Action
menu
” on page 46.
The wash cycle does not start after pressing the Close hood button, touching the
hood or manually closing it.
Additionally: wash start will not work on dishwashing machines with rack detection
depending on the configuration ordered and the rack inserted.
Option 2: automatic wash start has been activated
, see chapter “
Action
menu
” on page 46.
The wash cycle does not start when the Close hood button is pressed. When
manually operating the hood, it must be closed within 10 s of pressing Close
hood .
Additionally: wash start will not work on dishwashing machines with rack detection
depending on the configuration ordered and the rack inserted.
8.3.11 Prevent rinsing start on machines without automatic hood sys-
tem
The hood should be closed without starting a programme. After the last wash cycle
has been carried out, the
Stop wash start icon is displayed.
When the corresponding confirmation button is pressed in the upper right corner,
the
Close hood symbol is shown in the display. The operator can now close the
hood within 10 seconds without starting the programme. The key must then be
pressed again. If necessary, running i-menu sessions must be terminated before-
hand with the service access key, see chapter “Change authorisation level” on
page 44!
8.4 Malfunctions
If the described operational problems occur repeatedly, the cause must be identified.
Occasional malfunctions
Malfunction Possible cause Remedy
Dishwashing machine
doesn't fill up
No water present Open the shut-off valve
Dirt trap clogged Clean the dirt trap
Open hood Close hood
Final rinse does not spray
No water present Open the shut-off valve
Dirt trap clogged Clean the dirt trap
Streaks / smears on the
washware
Unsuitable rinse aid Change product
Incorrect dosing quantity Adjust dosing quantity
Water pre-treatment defective Check water pre-treatment
Strong formation of foam
in the wash tank
Dirt level too high
Prepare the washware more thor-
oughly/change tank water more frequently
Manual dishwashing detergent
used
Do not use a foaming manual dishwashing
detergent for precleaning or for cleaning the
machine. Foam can cause malfunctions in
the dishwashing machine and a poor wash-
ing result.
Unsuitable detergent Change product