9750359
46 / 62
Action menu
Symbol
Level Description
Ventilate deter-
gent pipe
1, 4
Starts detergent or rinse aid dosing pump to ventilate the transport
pipes when required, e.g., when the canisters are empty during
operation.
Ventilate rinse
pipe
1, 4
Automatic wash
start
1, 4
Active: hood closes on touch, then wash starts
Inactive: hood closes on touch, but wash does not start
Manually start
water change
1, 4
If automatic wash tank water regeneration with fresh water is in-
sufficient, an additional water change may be necessary.
Descaling
1, 4
Starts descaling programme.
Reset counter
1, 4
Reset the interval for the pre-filter change of the reverse osmosis
module.
8.7
Reset the counter
Note
In order to be able to reset counters in security access level 1, this function must be
separately enabled by an authorised MEIKO service technician. Resettable coun-
ters:
• Maintenance counter
• Reverse osmosis (UO) filter insert
1. Switch to security authorisation level 1 u
ser configuration level
, see page
2. Call up the i-menu using the relevant confirmation key.
3. Switch to the
Settings
tab page.
4. Select the item
reset counter
.
5. Confirm the selection.
Summary of Contents for M-iClean H series
Page 61: ...61 62 9750359 13 Notes...
