background image

Service manual

Type: WM50

Replaces

New type

old type

Main differences

Product info

WM33A

WM33

Programmer no longer fitted, replaced by rotary switch

and electronic control card. E2 no longer fitted,

new programs.

A

New panel graphic.

WM44A

WM44

Programmer no longer fitted, replaced by rotary

A

switch and electronic control card.

E2 no longer fitted, new programs.

New panel graphic.

WM50

NEW

Electronic control with knob and 7-segment

B

LED display. 11 programs.

WM55A

WM55

New control card.  New menu logic.

C

New programs.  Among other things, 1-24 hour delayed start.

New panel graphic. Shop program indicated on the display.

WM56

NEW

Electronic control with buttons and display.

D

8 programs. Shop program indicated on display.

WM66A

WM66

See WM55A.

C

Overview of new/modified types of

washing machines introduced to the

market in 2001

Product:

Date:

11.1.2002

Reference:

N-Å Carlsson

Group:

21

 Page: 1(10)

ASKO Cylinda’s range of washing machines was modified during the autumn of 2001.  A brief
overview of the modifications which were carried out follows below.

Further information is given in the product data given below.

Front-loading
washing machine

Summary of Contents for WM50












Reviews: