Handling
1. Sort the wash
2. Press the main switch,
, open the door,
, and place the wash in the machine.
3. Pour in the washing powder and also the rinsing aid if necessary.
4. Select program, adjust temperature, spin speed and option if necessary.
Settings appear on the display. Options appear as a lit LED alongside each button.
5. Close the door and start the program with the
- button.
To interrupt a program hold down the
- button for 3 seconds.
6. At the end of the wash program open the door with
.
7. After the wash turn off the main switch
and close the wash door.
Display indications
The display shows Explanation
No program selected
One or two digits, followed by an h.
Delayed start has been selected and the program has star-
ted. The display shows the number of hours left until the
program starts.
One digit, an H followed by two digits or only 1-2
digits, means that a program is running.
The display shows the remaining time in the program
in hours and minutes.
Appears when temperature is selected. The tempe-
rature can be indicated either in degrees Celsius ( C)
or Fahrenheit (F).
CC and CF respectively mean that the machine is set
to the temperature of the incoming water.
To change the display see the section Washing tem-
perature – Celsius or Fahrenheit in the instructions for
use.
Program ready. Remove the wash.
Can be displayed when selecting spin speed. Indi-
cates No spin/No drain. The programme will then
be run without spins and will be completed with the
final rinse water still in the machine.
Can be displayed when selecting spin speed. Indi-
cates No spin. The programme will then be run wit-
hout spins.
When the Anti-crease option has been activated the
drum rotates a few times/min. for 2 hours after the
program has ended. In the mean time AC appears on
the display. You can end and open the door at ay time
by pressing the door opening button.
May appear instead of temperature when the setting
is not appropriate. For example temperature cannot
be selected for Rinse program.