9 / 62
9750359
3.3
Residual risks
Phase
Activity
Nature of the hazard
Avoidance measure
Transport and
assembly
Loading and unloading
with forklift truck
Crushing/impact
• Load-bearing capacity of the forklift truck
must be adequate for the weight of the
machine
• Please note the machine's centre of
gravity
• Secure to prevent slipping
Deposit at the installation
location
Crushing/impact
• Ensure that the ground beneath is capa-
ble of taking the load
• Ensure that the machine cannot tip
Incorporate into cus-
tomer table system
Shearing
• Ensure that no shear points are created
between the hood and the table
Position freestanding
machine
Crushing
• Ensure that the freestanding machine is
secured to prevent it from tipping back-
wards
Install electrical connec-
tions
Electric shock
• Adhere to the accident prevention regula-
tions
Install separate GiO
MODULE (optional)
Trips/falls/crushing
• We recommend fastening the GiO MOD-
ULE to the wall/table/machine
• Mount freestanding module using solid
base
• Possibly run module at 90 degrees (ly-
ing)
Commissioning
Fill with
detergent/rinse aid
Eye injury/health risks
• Wear protective eyewear/gloves
• Avoid contact with skin and eyes
Operation
Filling/heating
Scalding
• Do not set machine in operation without
tank cover sieve
Wash cycle running
Scalding on inappropriate
opening of hood
• Do not open hood during cycle
Dishwashing machine
catching fire due to over-
load or blockage of pump
motors
• Always use fine/coarse sieve when run-
ning machine to keep out foreign bodies
• Pre-wash washware
Loading and unloading
the dishwashing ma-
chine
Trapping of hand
• To close the hood, use the handle desig-
nated for this purpose
Broken washware causing
cuts/severing
• Wash washware in the specially de-
signed rack in the dishwashing machine
• Place small items in the appropriate rack
inserts
• Washware must not come into contact
with rotating parts of the dishwashing
machine
Summary of Contents for M-iClean H series
Page 61: ...61 62 9750359 13 Notes...
