55 / 62
9750359
9.3
Daily cleaning
Caution
Material damage due to water ingress
Electrical cables and electronic components can be damaged if they come into
contact with water.
• The dishwashing machine, switch cabinets and other electrical components
must
never
be sprayed with a hose or high pressure cleaner.
• Make sure that no water can enter the machine unintentionally.
• If installed at ground level,
never
flood the surrounding room.
When machine is drained, see page 44.
1. a) Open hood with the relevant operation key
arrow upwards
.
b) Open hood by tapping it.
2. Remove sieve, filter and wash system.
3. Remove all food residues sticking to the tank, the tank heater and the filters us-
ing a brush.
4. Remove the wash and rinse arm and rinse thoroughly under running water.
When doing this, pay particular attention to the nozzles!
5. Clean filter under running water.
Do not use a foaming manual dishwashing detergent for pre-cleaning or for cleaning
the machine. Foam causes malfunctions and results in poor wash results.
6. To ensure that the sensor detects the rotation of the washing arm, remove all
dirt particles and ferrous particles sticking to the magnet (1).
7. Reinstall all parts.
Summary of Contents for M-iClean H series
Page 61: ...61 62 9750359 13 Notes...
