background image

9750359

 

26 / 62 

 

 

6.2 

Transport 

 

 

 

  Warning 

Danger of injury from the machine falling over 

The machine can fall over if transported incorrectly. People can be injured as a re-
sult. 
•  Transport work must be performed only by qualified persons. 
•  Please note safety instructions on the packaging. 
•  Always transport the machine only on the supplied wooden frame. 
•  Wear protective gloves and shoes. 

 

 

The packaging is specifically designed to allow the appliances to be moved safely 
and securely using a pallet jack or a sack truck. For safe transport, the dishwashing 
machine is supported by a special square-timber frame. 

 

 

 

•  Execute transport carefully. 
•  Open packaging using a suitable tool. 
•  Unpack the dishwashing machine only after transport is completed. 

 

6.3 

Perform assembly 

 

 

  Warning 

Danger of injury due to machine tipping 

If machine is freestanding and not secured, it could fall over and cause crushing. 
•  If machine if freestanding, it must be secured long term to prevent tipping. 
•  Wear protective gloves and safety shoes. 

 

 

 

  Beware 

Improper fresh water connection 

Backsiphonage of non drinking water into the water supply system 
•  Have the fresh water connected by a qualified professional and in accordance 

with local regulations. 

 

 

 

Caution 

Material damage due to ingress of pressurised media 

•  Shut off the fresh water supply at the main valve prior to installation works. 
•  Check that all lines are securely connected. 

 

 

 

Caution 

Material damage due to escaping steam 

Small quantities of steam may escape through the dishwashing machine's hood 
area. It is possible that adjacent furniture may warp. 
•  Protect adjacent furniture from warping. 
•  If possible, avoid installing the machine in an area close to furniture susceptible 

to warping. 

 

 

Summary of Contents for M-iClean H series































































Reviews: