Megger TDS40, Operating Manual, Page: 63 / 71

7-63
Code
Cl. Operational
message
Description Input
- C Breakdown in cable High voltage has been
switched off by system
after breakdown in cable.
Possible result of a
cable test
- C Cannot be charged High voltage has been
switched off by system
due to breakdown of
voltage.
Possible result of a
cable test
- C Test time over High voltage has been
switched off by system
after test time has
elapsed.
No action required
- C HVOff by OWTS-M HV is switched off via the
connected OWTS system
No action required
- C HVOff by system High voltage has been
switched off by system
after a fault has occurred.
No action required,
refer to error list
- C Unknown message A condition message has
been called up that is
unknown to the system.
Software trouble -
must not occur during
operation