Megger TDS40, Operating Manual, Page: 22 / 71

2-22
2.8.2 Display of the Operating Module
Fig. 4: Display of the Operating module (View of the standard operating mode)
1 Representation of parameters with value and content resp.
2 Representation of residual time and/or measuring values
3 Representation of operator guidance / status display
Following signals are indicated in the line of operator guidance / status display (Fig. 4,
item 3):
•
Operator guidance
„Select mode OK?“ e. g.
•
Status display „Running. HVOff?“ e. g.
•
Switching condition
„HV interlock“ e. g.
• Cause for shutdown „Breakdown in cable“ e. g.
• Warning „34: No printer data“ e. g.
• Failure message „19: Coil overload“ e. g.
1
2
3
VLF mode
10kV
5min
0.0kV
0.00mA
Prepared . HVOn?