Megger TDS40, Operating Manual, Page: 52 / 71

6-52
6.5 Function User Setup / User Level
By pressing the F2 key (Fig. 3, item 5) and turning the knob / push-button (Fig. 3, item 6)
the menu "User Setup" can be accessed.
After administrator rights have been gained as described in section 5.4, the “User Setup”
menu can be used to change the user level. That function is of importance when logging to
SystemCard (see section 6.4.3) or parametrizing the system using a SystemCard (see
section 6.4.2).
Fig. 36: Setup: User profile
By setting the user level to
“Single” , the system can only be operated with a parametrized
SystemCard. That way, the users operating the system on-site are not allowed to change
test parameters not specified as [set on device] .
By setting the user level to
“Standard”
, the system can be operated with or without
SystemCard.
Attention! Only the user level “Standard" allows the system to be operated without
SystemCard.
User-Setup <A>
Lang.: English
*Level: Standard
User level ?