Megger TDS40, Operating Manual, Page: 46 / 71

6-46
Attention: When initiating a test printout ("Text" or “System”), any set of measuring data
that may have been logged during a previous cable test will be deleted.
Attention:
Immediately change the print settings back to your normal protocol printout
mode after you performed a test printout.
Note: a SystemCard is used with the system (see section 6.4), make sure that when
parametrizing the SystemCard under “WinkisVFL”, the "
Settings: Protocol printout
"
parameter has been set to [set on device] . Otherwise, the print settings are automatically
adopted from the SystemCard and cannot be changed manually.