Megger TDS40, Operating Manual, Page: 49 / 71

6-49
6.4.3 Logging to SystemCard
By activating the logging function, measuring data logged during a cable test can be
written to a SystemCard. These data may consist of system information, system / test
settings, information about the course of the cable test, the measured data (test voltage,
leakage current) and the test result.
Back in the office, the logged data can be transmitted from the card to a PC where it can
be analyzed and archived using the WinkisVLF software.
For detailed information about the WinkisVLF software, please refer to its online help
By pressing the F2 key (Fig. 3, item 5) and turning the knob / push-button (Fig. 3, item 6)
the menu "Protocol" can be accessed. Here the logging mode (“Prot.”) of the test and
diagnosis system can be adjusted by rotating the knob / push-button and saved by
pressing it.
Fig. 32: Setup: Protocol off
Fig. 33: Setup: Protocol extended
Protocol
*Prot.: Extended
Print: Standard
Set protocol mode ?
Protocol
*Prot.: Off
Print: Standard
Set protocol mode?