Settings
46
5.1.2
Pairing Bluetooth headphones
Bluetooth headphones must be paired with the PD Scan once before being used for the
first time. To do so, proceed as follows:
1. Switch on the headphones and check the charge level.
2. Make sure that so-called pairing mode is activated on the headphones. The
headphones provided with the device signalise this with an LED that flashes red
and blue in alternation.
3. Tap the
button in the main menu and open the
System
settings menu.
4. Tap on the
Pair Bluetooth
button.
The PD Scan will now search for Bluetooth devices nearby.
5. Select the required Bluetooth device. The headphones have been successfully
paired when the message Pairing succeeded appears in the display and the
appears on the upper edge of the screen.
After being successfully paired for the first time, the headphones only have to be
switched on after the PD Scan in future, and should then connect to it automatically.
However, the symbol only appears after an acoustic measurement was started.
