Performing measurements
29
4.2.2
Selecting the operating mode
Once the new folder name has been created, the measurements can be started by
selecting the required sensor.
Pressing the
Select measurement sensor
field on the touch display or pressing
opens the menu for selection of the operating mode.
Pressing the required field on the touch display, or navigating to the required field using
, followed by
, allows the required operating mode to be started.
Depending on the sensor connected, the operating modes available differ as follows:
Connected sensor
Possible measurement procedures
No external sensor
connected
Acoustic measurement with the
internal sensor (
AA Int
) or
measurement using the internal
TEV sensor (
TEV
or
TEV Seq
)
