Settings
44
5.1.1
Importing and exporting configuration and comparison data
In addition to the actual measurement data export (see page 52), there are two other file
formats that can be imported and exported and thereby exchanged between different
devices:
Configuration file
This file contains all the variable setting
parameters (such as the evaluation threshold
values and operating mode settings). The file
can be transferred to other devices. This
allows a company to apply the same settings
to all the devices they use, for example.
Comparison data set
This file contains elementary measurement
data of the last measurement performed for
each measured object identified using a QR
code. The next time the same object is
measured, this data is then displayed as
reference values in the comparison screen.
Regularly exchanging this file between all the
devices used ensures that the comparison
data set on each device is complete and up
to date.
To prevent these important files from being deleted accidentally, the actual files are
located in an invisible area of the memory, which cannot be accessed even when
devices are connected via USB. The files must be "exported" to the visible memory
before they can be exchanged with other devices. Only from this location can the files
then be copied from the device and transferred to another, where they must then once
again be "imported" into the invisible area of the memory before they can be used.
General information
Export
Transfer
Import
