40
You can program the universal remote control so that the universal
functions “Volume” and “Mute” will actuate another device type than the
TV set.
1. Keep the
CODE
key pressed down for approx. 3 seconds until the
background lighting of the source key briefly flashes and then
remains on.
2. Keep the
MUTE
key pressed down until the source key goes off.
3. Press a source key for the device for which you want to control the
volume and mute functions. The light for this source key will remain
lit.
4. Press the
Mute
key; the source key light will go out. If you
accidentally selected a device that does not have its own volume
control, the source key will flash for 3 seconds.
Programming the volume/mute universal functions to a
particular device
You can program the universal remote control in such a way that it will use
only that particular device’s own volume and mute functions. The
universal function for this mode or device type is therefore switched off.
1. Keep the
CODE
key pressed down for approx. 3 seconds until the
background lighting of the source key briefly flashes and then
remains on.
2. Press the
Mute
key until the source key light goes out.
3. Press the source key for the device that is only to have its own volume
and mute functions.
4. Press a volume key. The light of the source key remains lit.
5. Press the
Mute
key again, and the source key light will go out.
Restoring the universal volume/mute functions
If you have changed the universal volume and mute functions, as
described in the previous two sections, you can reset the functions back to
the factory settings and thus restore the “Punch Through” effect.
1. Keep the
CODE
key pressed down for approx. 3 seconds until the
background lighting of the source key briefly flashes and then
remains on.
2. Press the
Mute
key until the source key light goes out.
3. Press the
Mute
key again. The source key light will extinguish
completely. The volume and mute functions are now restored to their
factory defaults.
Troubleshooting
The remote control does not work:
Check whether your devices have been properly connected and are
switched on.
Check whether the remote control batteries have been correctly inserted
and have ma/– polarity.
If the batteries are too weak then replace them with new ones.
There are several device codes listed under the brand name of my
device. How do I determine the correct device code?
To determine the correct device code for your device, try each consecutive
code until most of the functions of the device function properly.
