38
Code searching by brand name
This function gives you the option of searching by brand name (see code
list). This is done as follows:
1. Switch the relevant device on manually.
2. Keep the
CODE
key pressed down for approx. 3 seconds until the
background lighting of the source key briefly flashes and then
remains on.
3. Briefly press the required source key (
TV
,
SAT
,
AUX
).
4. Enter the one-digit code according to the following table:
Key 1 = Medion, Tchibo
Key 2 = Philips, Radiola, Philco, Erres, Pye
Taste 3 = Sony, Akai, Panasonic, JVC, Sharp, Toshiba, Daewo
Key 4 = Thomson, Brandt, Fergusson
Key 5 = Saba, Nordmende, Telefunken
Key 6 = Grundig, Blaupunkt
Key 0 = all brands.
5. Continue pressing the
P+
key (or for video recorders
POWER
or
PLAY
), until the device responds accordingly. Proceed quickly,
otherwise the automatic code search will start.
6. Save the code by pressing
ENTER
.
If all the codes have been searched, the source key will flash for approx. 3
seconds.
Code identification
Code identification gives you the opportunity to determine codes that
have already been entered and stored in the remote control. Proceed as
follows:
1. Switch the relevant device on manually.
2. Keep the CODE key pressed for approx. 3 seconds until the red LED
remains solid.
3. Briefly press the required source key (
TV
,
SAT
,
AUX
).
4. Briefly press the CODE button. The source key will briefly extinguish
after the key has been pressed.
5. To find the first number, press the number keys from 0 to 9. If the
source key extinguishes briefly, then it is the first stored number.
6. To determine the second number, press the number keys again from
0 to 9. Repeat the procedure for the third number.
7. The source key will extinguish as soon as the button for the third
number has been pressed.
Code identification has now been completed.
Normal operation
Operating individual devices
After you have finished programming your remote control for your audio/
video devices, the remote control will work in the common main functions
just like the original remote control of the respective device.
Point your remote control at the desired device and press the relevant
source key. The key will light up briefly but will not remain lit.
