18
B
UTTON
FUNCTIONS
Operating the player using the controls on the player or remote control
Buttons on the front of the
player
You can activate the main play functions of the player using the buttons
on the front of the unit.
Buttons on the remote control
In addition to these basic controls the remote control also provides
numerous additional options for using all functional elements of your
DVD player. You can, for instance, use the remote control to navigate
through the menus, which are then displayed on the television screen.
Standby/Switching on/Switching off
Standby mode
Use the
POWER
button on the rear of the unit to switch off the unit into
standby mode. The blue LED comes on when the device is in standby
mode.
Switching on
`
Press
(
STANDBY
), to switch the unit on. The display lights up. The
type of display depends on the type of recording medium.
Stitching off
`
Press
(
STANDBY
)
again to switch the device into standby mode. The
display will go out.
Inserting a disc
Make sure that there is about 15 cm of space in front of the disc
compartment so that it can open without hindrance.
`
Switch the unit on and press
OPEN/CLOSE
.
`
Insert a disc into the disk compartment with the title side upwards.
Make sure that you place the disc in the middle of the disc holder so that
it does not stick when you close the compartment.
`
Press the
OPEN/CLOSE
button. The disc compartment closes.
DVDs start playing automatically after a few seconds. The type of display
depends on the type of disc. You may need to press
PLAY
, otherwise
a menu may appear in which you need to make a selection using the arrow
keys.
In this manual we are describing the remote control buttons.
as the remote control (with the exception of the power switch) includes all the functions of the
unit. If reference is made to the controls on the DVD player itself, this will be clearly indicated.
