17
Learn function
You can manually save the functions of an original remote control to
your universal remote control. The universal remote control can
“learn” up to 150 commands.
Notes on learn function
Use new batteries for both remote controls.
One original remote control can be saved to every source key (8-
in-1 function).
Once the memory is full, the background lighting of the source key
will flash for 3 seconds.
Programming each key can take approx. 3 seconds.
If you are programming an additional function to an existing code,
please take note which keys are still unassigned beforehand.
The following keys cannot be assigned to functions:
LEARN
,
S
(
SETUP
),
ALL OFF
,
MACRO
,
EPG
and all source keys.
Some original remote controls (for DVD, video recorder, SAT) can
themselves be programmed with the device codes of some TV
brands to carry out basic TV set functions (volume, mute, channel
search).
Do not attempt to transfer the functions of an original remote
control that has been programmed with the code of a different TV
set to your universal remote control. This could cause
programming errors.
First try to program any type of command and then test it. Then
delete all commands (“Deleting commands for all source keys”,
page 19) and begin with the actual programming.
Do not execute the learn function under a low-energy lamp.
Such lamps (e.g. fluorescent lamps) can contain infrared light
components that could influence the learn function.
Univ-FB_MD80383_AUS.fm Seite 17 Dienstag, 24. Januar 2006 8:57 08
