18
Programming the functions
To programme, proceed as follows:
Place the remote controls with the infrared diodes facing each
other spaced 15 to 50 mm apart on the table.
1. Keep the
S (SETUP)
key pressed down for approx. 3 seconds, the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the SETUP key
will activate the SHIFT function.)
2. Briefly press the desired source key (
TV, VCR, DVD, CD, CBL,
ASAT, DSAT, AUX)
for this original remote control.
3. Press the LEARN key.
4. Now press the key on the universal remote control
that is to be
assigned to the relevant function
(the source key is permanently
lit).
5. Now keep the key of your original remote control pressed down
until the source key of the universal remote control extinguishes
once (each faulty programming will be indicated by a flashing
key).
6. Repeat steps 4 and 5 until all of the desired functions have been
saved.
7. Stop the programming by pressing the
SETUP
key.
Univ-FB_MD80383_AUS.fm Seite 18 Dienstag, 24. Januar 2006 8:57 08
