19
SHIFT function
Some of the keys of the universal remote control can have double
assignations. To use these functions, briefly press the
S (SETUP)
key
(the source key will light up) and then press one of the function or
number keys.
If no other key is pressed for 15—20 seconds after the SETUP key
was briefly pressed, the SHIFT function will not become active.
Deleting functions
Deleting commands for only one source key
1. Keep the
S (SETUP)
key pressed down for approx. 3 seconds, the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the SETUP key
will activate the SHIFT function.)
2. Briefly press the desired source key (
TV, VCR, DVD, CD, CBL,
ASAT, DSAT, AUX)
.
3. Press the
LEARN
key twice.
4. Press the
SETUP
key.
All commands of the relevant source key have now been deleted.
Deleting commands for all source keys
To delete all commands altogether, proceed as follows:
1. Keep the
S (SETUP)
key pressed down for approx. 3 seconds, the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the SETUP key
will activate the SHIFT function.)
2. Press the
LEARN
key twice.
3. Press the
SETUP
key.
All codes that were programmed using the learn function have now
been deleted.
Univ-FB_MD80383_AUS.fm Seite 19 Dienstag, 24. Januar 2006 8:57 08
